Items Covered
- 1. Slide positioning accuracy less (better) than 0.0005 mm per 300 mm of travel;
- 2. Bidirectional slide positioning repeatability less (better) than 0.00025 mm per 300 mm of travel;
- 3. Spindle "run out" and "camming" less (better) than 0.0004 mm total indicator reading (TIR);
- 4. Angular deviation of the slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel; and
- 5. Slide perpendicularity less (better) than 0.001 mm per 300 mm of travel;
- b.Fly cutting machines having all of the following characteristics:
- 1. Spindle "run out" and "camming" less (better) than 0.0004 mm TIR; and
- 2. Angular deviation of slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel.
Control Reasons Explained
This ECCN is controlled for the following reasons. Each reason maps to a column on the Commerce Country Chart, which determines whether a license is required for a given destination.
- ATAnti-Terrorism
- Basic anti-terrorism controls that apply to most items on the CCL. A license is required for exports to countries designated as state sponsors of terrorism.
Common Questions About 2B992
What does ECCN 2B992 cover?
ECCN 2B992 is an entry on the Commerce Control List (Materials Processing). The List of Items Controlled below describes the products, software, or technology captured by this classification. Compare your item against those parameters when self-classifying.
How do license requirements work for this ECCN?
License need depends on the control reasons shown for this code (for example NS, RS, MT, AT), the destination country, and how your transaction maps against the Commerce Country Chart, de minimis, and other EAR provisions. This page is a research aid only. Confirm against the current rule text and your specific facts before exporting.
Where is the official text for this ECCN?
The legal text appears in Supplement No. 1 to part 774 of the Export Administration Regulations (15 CFR Part 774). Use the official BIS link on this page to open the current supplement entry for this ECCN.
What if my product matches more than one ECCN?
When several ECCNs appear to fit, the controlling entry is usually the one that is most specific to your item's form, function, or technical limits. Cross-references in the List of Items Controlled and related ECCNs listed on this page are common starting points for narrowing the choice.
How often should I re-check this classification?
The Commerce Control List changes when BIS publishes new or amended rules. Revisit the official entry when regulations update, when the product's technical parameters change, or when the destination, end-user, or end-use of a transaction changes.
What do the control reason codes mean?
Each control reason (NS, RS, MT, AT, etc.) maps to a column on the Commerce Country Chart in Supplement No. 1 to part 738 of the EAR. When a control reason applies to your ECCN and the destination country has an X in that column, a license is generally required unless an exception applies. See the Control Reasons Explained section on this page for details on each code.